Korte beschrijving

D&R Clubmix

Informatie

Clubmix frame with 1 mono module, 6 triple input modules, 3 blanks € 2.833,-- (end user price)

 

INTRODUCTION.

The D&R "ClubMix" is the result of intensive market research among professional users in the discotheque and club circuits. From concept to reality, the emphasis was on "user friendly" features and superior electronic design.

The "ClubMix" is a totally modular mixing console with features and functions never before combined in any mixing desk.

A unique feature in this heavy-duty welded steel frame is the availability of thirty inputs when using ten stereo channels.

The "ClubMix" has space for 10 input modules giving a choice of mono mic /line modules or triple input stereo modules..

The master section has functions and features to please any user demands.

LOW NOISE MIC/LINE CHANNELS WITH VOICE OVER CONTROL.

The balanced mic/line channels have internal jumper settings for 48 volt phantom powering.

When used with cart machines, several internal jumper settings can be selected to start the cartridge machine either by fader, the Cue switch, and/or the ON switch.

An XLR is fitted for the mic input and standard jack sockets for the line, insert, and start functions. The "ClubMix" has a pre and post Auxiliary send as a standard feature. The Equalizer is three band "high definition" type with carefully selected crossover frequencies to guarantee a very musical effect when equalizing.

The Voice Over switch dims (lowers the volume) the music outputs which makes the announcements easier to understand. The ON switch has two functions, it switches the channel on and at the same time an external device can be controlled. The CUE switch automatically switches the signal heard in the headphones from the master output to the channel were depressed A 100mm smooth feeling fader completes the mono Mic/Line module. If servicing is required, the module can be easily removed from the console, even while the console is in operation.

   

TRIPLE INPUT STEREO MODULES WITH R.I.A.A. EQUALIZED AMPS AS AN OPTION.

The stereo channel can accept CD players, turntable players (with optional R.I.A.A. amps) tape decks, video players, as well as balanced Mic inputs. Three sources can be connected to the module at the same time, whereby selection can be made from two line inputs ( one can be R.I.A.A. equalized) and a Mic input The R.I.A.A. equalized amps are on optional

plug-in printed circuit boards which can be plugged onto the main input board.

The active gain control has a range of 40 dB with a minimum noise contribution of which D&R is famous for. The three band equalizer has a boost and cut of 16dB on carefully selected frequencies. Both auxiliary sends are stereo summed, aux. 1 is pre fader and aux. 2 is post fader wired.

INDIVIDUAL CROSS FADER ROUTING ON EACH STEREO MODULE.

Another "ClubMix" unique feature is its ability to route any of the stereo modules to the cross fader by selecting the A or B assign switch.

The ON switch activates the channel and is capable of starting external devices. The fader, as well as the Cue switch can also be used to start external devices if jumpered accordingly.

EIGHT SEPARATE MASTER OUTPUTS.

The "ClubMix" master has several individually adjustable output sections to allow for simple solutions in every installation.

In addition to the" normal" ground compensated balanced Zone 1 output, the ClubMix has a Zone 2 output, Zone 3 output, as well as a sub bass output (for subwoofer amps), a transformer balanced light output, two auxiliary outputs and a stereo headphone output.

The "ClubMix" master has separate mixing busses for the mic signals and the stereo signals to allow control over the music using the voice over circuitry. This also gives the user total control over the outputs and make any balancing between the two outputs possible.

The Zone1 output sums all signals coming directly from the input channels, or from the cross fader

The stereo signal can be mono summed and is available on XLR type connectors on the back of the console. Above the Zone1 output are controls for the voice-over circuitry which control the depth and the release of the control signal. The Zone2 output can be used to provide other area's of the building with music and speech. The Zone 2 "FLW PHONES" switch transforms this output to a monitor output if needed. Above the Zone2 output is the stereo Auxiliary return which accepts external sources such as reverb or other effects returns needed to be mixed into the main outputs. The adjustable Light output has a separating transformer and can be fed from the music only or the total output signal which includes the mic channels.

FEATURE FILLED HEADPHONE OUTPUT HAS SPLIT CUE FUNCTION AND A BALANCE CONTROL BETWEEN PROGRAM AND CUE.

The phones section has an input switch selecting between Zone1 or Zone2 or the input channels which is activated by the autocue function.

The SPLIT switch directs the program signal (everything coming from the channels) to the left and the summed stereo cue signal to the right. This circuitry makes syncing of two input signal an easy task.

The Program signal can be mixed into the Cue signal (if necessary), so the main output signal will not disappear completely when using the Autocue function.

The Zone3 signal is used for those area's in the building where either music only or spoken word

is needed or any combination of the above. The MIC/Music control adjusts any balance between the two.

The Auxiliary outputs are located above the Zone3 outputs.

Two 13 segments peak-reading LEDbargraph meters are accurately following the signals chosen by the headphone input selectors.

SMOOTH FEEL CONSTANT POWER CROSS FADER AND PUNCH SWITCHES PROVIDE ADVANCED D.J. FUNCTIONS.

The Cross fader is fed by the assign switches in the stereo channels and makes crossings possible between any of the assigned input channels. The Punch switches control FET switches which silently mute one or two of the Cross fader outputs. This feature creates intermittent rhythmic effects needed in today's life D.J. performances.

The "ClubMix" is a "state of the art" heavy duty workhorse loaded with advanced know-how derived from the D&R research and development department which is your guarantee of a feature-packed technically advanced product.

Your "ClubMix" brings every sound under control.

SPECIFICATIONS:

 

MONO Channels:

  • XLR inputs level : -65 dBu to -0dBu.

  • pin 1 : signal ground (shield)

  • pin 2 : signal high (in phase +)

  • pin 3 : signal low (out of phase-)

  • Line inputs level : -20 dBu to +20dBu.

  • tip : signal high (in phase +)

  • ring : signal low (out of phase -)

  • sleeve : signal ground.

  • Inserts level : 0dBu (0.775 Volt)

  • (only mono mic channels) tip : return signal.

  • ring : send signal. sleeve : ground.

STEREO INPUT CHANNELS

  • XLR inputs level : -65 dBu to -0dBu.

  • pin 1 : signal ground (shield)

  • pin 2 : signal high (in phase +)

  • pin 3 : signal low (out of phase-)

  • Line B inputs with R.I.A.A. Phono inputs level : 2 - 5 mV.

  • tip : left.

  • ring : right.

  • sleeve : ground.

  • Stereo line inputs level : -20 dBu to +20dBu

  • tip : left.

  • ring : right.

  • sleeve : ground.

  • START connector level 24 volt 500mA max.

  • Shorts between tip and ring when activated

MASTER OUTPUTS:

  • ZONE 1 Master outputs level + 4dBu (1.22 Volt).

  • XLR connectors.

pin 1 : signal ground (shield)

pin 2 : signal high (in phase +)

pin 3 : signal low (out of phase-)

  • ZONE 2 LEFT/RIGHT Level +4dBu (1.22volt) XLR connectors.

pin 1 : signal ground (shield)

pin 2 : Left

pin 3 : Right

  • SUB BASS OUTPUT jack +4dBu at 100E

tip: in phase

ring: ground compensation

sleeve: ground

  • LIGHT OUTPUT Jack +4dBu at 100 Ohm

tip: in phase

ring: out of phase

Sleeve: ground

  • ZONE 3 OUTPUT Jack +4dBu at 100 Ohm

    tip left.

    ring : right.

    sleeve : ground.

     
  • INSERTS level : 0dBu (0.775 Volt)

    tip : return signal.

    ring : send signal.

    sleeve : ground.

     

  • TAPE OUTPUTS level -10dBv (300 mV).

    tip : left output signal.

    ring : right output signal

    sleeve : ground.

     

  • AUX RETURN level : 0dBu-(775 mV)

    tip : left input.

    ring : right input.

    sleeve : ground.

     

  • AUX SENDS Jack connector level : + 4dBu (1.22 Volt).

    tip: in phase.

    ring: ground compensation

    sleeve: ground

     

  • PHONES Stereo jack, level : + 4du (1.22 Volt)

    tip: left output

    ring: right output

    sleeve: ground

0 Beoordelingen